1 / 6
Ender 3v2/ Ender 3v2 neo Psu cover for 80mm x 25mm Fan (with fanguard) — zdjęcie 1
1 / 6

Ender 3v2/ Ender 3v2 neo Psu cover for 80mm x 25mm Fan (with fanguard)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of a model from thingiverse. Didn't like the open blade design, so I added a fanguard. Fits all 80mm x 25 mm Fans.

Ocena
5 / 5
Polubienia
43
Pobrania
247
Wydruki
3
Wyświetlenia
1848
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I really liked the 80mm design by CyberwareDK over on thingiverse. 
An 80 mm fan with good ventilation holes is plenty enough for the PSU and the Noctua NF-A8 ULN is almost inaudible.
However the original design had no Fanguard, which I was a bit concerned about, knowing my luck. So I added a fanguard that I found plaesing. It also helps in mounting a dustfilter.

This design features air vents. The stock plate on the Ender 3 V2 neo does not. To increase longevity I highly recomend changing the stock cover!

Pictures of the assambled PSU will follow, I'm just waiting for the fan to arrive.

I highly recomend the Riser Feet by ellegamee (Ender 3 V2 Riser Feet 25 & 35 mm by ellegamee | Download free STL model | Printables.com), since they allow a hight of 35mm, which is needed.

Also check out my remix of a motherboard cover by scaryPug: Ender 3v2/ Ender 3v2 neo Mainboard cover for 80mm x 25mm Fan (with fanguard) by Thunderbird332 | Download free STL model | Printables.com.

You can find additional silent mods in my collection.

The G-code added below leads to some issues with the overhangs, but uses minimal supports and is pretty fast (8.42 h).

Have fun and silence the jetengine that is the stock fan. 
 

Tagi