1 / 5
Bambu Labs X1C Spool Holder Clip for back of machine — zdjęcie 1
1 / 5

Bambu Labs X1C Spool Holder Clip for back of machine

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clips right over the metal bracket the comes with the Bambu Lab X1C to hold spools of filament at a better angle.

Ocena
0 / 5
Polubienia
11
Pobrania
71
Wydruki
0
Wyświetlenia
599
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This clips right over the metal bracket that comes with the Bambu labs X1C and is meant to be used with a spool holder standoff. This provides a cylindrical surface for the spools to roll on, and also orients the spool at a slight angle to better feed into the PTFE inlet tube.  

The wider end snaps on away from the printer.  Also, print with this wider end down, I had fine luck on the X1C without supports in PLA.  You can also get the STEP file for free from our website if you want to modify it.

Lastly, this is best used with one of the many, many bracket standoffs available. And if you are using cardboard spools, you likely want to print some spool arbors.  

Thanks!

Performance 3-d LLC

Tagi