Bambu Labs X1C Spool Holder Clip for back of machine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clips right over the metal bracket the comes with the Bambu Lab X1C to hold spools of filament at a better angle.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 71
- Makes
- 0
- Views
- 599
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This clips right over the metal bracket that comes with the Bambu labs X1C and is meant to be used with a spool holder standoff. This provides a cylindrical surface for the spools to roll on, and also orients the spool at a slight angle to better feed into the PTFE inlet tube.
The wider end snaps on away from the printer. Also, print with this wider end down, I had fine luck on the X1C without supports in PLA. You can also get the STEP file for free from our website if you want to modify it.
Lastly, this is best used with one of the many, many bracket standoffs available. And if you are using cardboard spools, you likely want to print some spool arbors.
Thanks!
Performance 3-d LLC