1 / 2
Micro Swiss NG Dual 5015 Fan housing for 40x20mm noctua fan — zdjęcie 1
1 / 2

Micro Swiss NG Dual 5015 Fan housing for 40x20mm noctua fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I edited the original model of Conor because I wanted to use a 20x40mm noctua fan as cooling for the heatbreak.

Ocena
0 / 5
Polubienia
13
Pobrania
71
Wydruki
0
Wyświetlenia
1071
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I edited Conors  original file so it could fit a Noctua 40x20mm fan. Sadly he didn't gave me the stp file of the alternative version with seperate part cooling chambers so I had to work with the stl and it might be inaccurate at some points and is a pretty big file. 

For me that versions works perfect and the other dimensions are the same as on the original. Hope somebody needs that it took me quite a while to edit.

 

Oh and btw the fan doesn't even need screws as it's hold in place by the cr touch mount.

Tagi