Liczymy pasujące modele…
This spacer fits over the plastic stand-offs that prevent you retrofitting a stock 40x20mm fan on the AD5M lower HEPA filter housing outlet. Without the spacer there is an approximately 4mm air gap between the fan body and lower filter…
This replaces the original Shroud For 40x20mm Hot-End Fan and the stock 4010 Blower Fan! I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.…
This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…
Small seed dryer I made for a friend who grows a lot of chilis with super tiny seeds with about 1mm in diameter. Features: It contains 5 trays with the size of 45x45x10mm. The trays fit tight with a 0.3mm gap into the tray holder. The fan…
This replaces the original Shroud For 40x25mm Hot-End Fan and the stock 4010 Blower Fan! I made a new shroud from scratch for a upgraded 40x25mm Hot-End Fan and the stock 4010 Blower Fan (and its mounting) for Creality Ender-3 V2. The…
Holds a 40x40x20mm 5vdc fan between spools 3 and 4 of the Snapmaker U1. Clips into the existing vent holes so no need to disassemble or modify the case or use tape. Remix of Full_covered_40mm_fan_cover_aimpoint.stl by pakkko/Dennis Romje.…
This is a re-creation of the stock hotend fan shroud on the Creality CR10s PRO. I found the stock 40x10mm 24v hotend fan is pretty loud, but replacing this with a 12v Noctua 40x10mm fan may not provide enough airflow. I wanted to use a…
I edited Conors original file so it could fit a Noctua 40x20mm fan. Sadly he didn't gave me the stp file of the alternative version with seperate part cooling chambers so I had to work with the stl and it might be inaccurate at some…
Odbočky/redukce na instalační kanály
I need some fairly solid hooks to hang various objects above my head in the garage. These hooks should be attached without drilling to a grid fixed on the ceiling of the garage made of 40x20 metal bars (anyhow, I left a screw hole in the…
The other day I bought an aluminum ladder from a reputable manufacturer as part of a special offer. The ladder was perfectly fine, however, the feet were completely unsuitable for use in the apartment (they had rude PP plastic shoes with…
This is a box to protect a 40x20 magnet or to be protected from it! The magnetic field will still be effective through the case but way less strong, removing a bit of danger of handling this bad boy around! If you enjoy or find this model…
I only had a 40x20mm fan available so i had to print a different top case for the rp4.
🇪🇸 Español Este sistema de montaje permite instalar un buzón de estilo americano en barandillas de aluminio con perfil rectangular de 40 mm de ancho por 20 mm de alto . El diseño evita tener que taladrar el metal, protegiendo el lacado y…
I only had a 40x20mm fan available so i had to print a different top case for the rp4.
Holds a 40x40x20mm 5vdc fan between spools 3 and 4 of the Snapmaker U1. Clips into the existing vent holes so no need to disassemble or modify the case or use tape. Remix of Full_covered_40mm_fan_cover_aimpoint.stl by pakkko/Dennis Romje.…
I remixed this design so that I could mount my CR-Touch with the original metal mount.
You probably don't need this. I had a very specific situation where I could only fit a slim 120mm fan over my AIO's radiator. I designed this to fit a couple of extra fans on the inside of my case to help push air out through the rad.…
Open Cable Chain with Clip 40x40x20mm Print Settings Printer: Geeetech A10 Rafts: No Supports: No Resolution: 0,2mm Infill: 30% Filament: Das Filament PETG Category: 3D Printer Accessories
Update 16.4.23: Step-Files uploaded Open Cable Chain with Clip 30x40x20mm Print Settings Printer: Geeetech A10 Rafts: No Supports: No Resolution: 0,2mm Infill: 30% Filament: Das Filament PETG Category: 3D Printer Accessories
🇪🇸 Español Este sistema de montaje permite instalar un buzón de estilo americano en barandillas de aluminio con perfil rectangular de 40 mm de ancho por 20 mm de alto . El diseño evita tener que taladrar el metal, protegiendo el lacado y…
Push fit fan covers for 40x20mm noctua fans 0.2 layer height no supports
Migrating from thingiverse https://www.thingiverse.com/thing:3807931 remix to fit a 40X40X20mm fan https://www.thingiverse.com/thing:3399705 the 2 mount screws for the fan are threaded M3 holes, but printing with a resolution of 0.2, the…
Customized version of https://www.thingiverse.com/thing:2430655 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2430655 Print Settings Printer: JGAurora A5 Rafts: No Supports: No Resolution: 0.2 Infill:…
I've always been looking for a dual blower fan cover (must exist) 50x15mm with hotend fan 40x20mm, but I've never found one. That's why I propose this hotend cover for Ender 3 V2. At 150mm/s speed (PLA) it's not perfect, but there is a…
Cable 'T' holder helping to hold cables in channel during installation. Fits channel 40x20mm. Needed to be printed with 0.2mm nozzle! "T" držák kabelů v instalační liště 40x20mm. Pomáhá přidržet kabely během instalace. Nutno tisknout s…
I use my Ender 3 Pro a lot, and thanks to that, both my Hot end fan and Parts cooling fan both gave up on me. This gave me a chance to upgrade each of them to a 40x20 hot end fan and a 40x20 parts cooling blower fan. I designed this to…
Some simple feet I made for my Ender 3. just pop them in and they'll stay there secure :)
Slightly raised the mount (1mm) so the fan clearance is higher and added reinforcement to the mounting stem. Printed in PETG since I didn't want to print in ABS. Working just fine. Clearance is great! Category: 3D Printer Parts
This is just a re-mix of the original by ilya_staryuk: https://www.thingiverse.com/thing:2882852 Also inspired from this cable channel from Supavitax (when I made this remix I forgot I had already seen his design, otherwise I would have…
This is a remix of 'Ender 3 V2 & Pro Silent Motherboard' by scaryPug Designed to fit Ender 3 V2, but will fit Ender 3 Pro also. Print settings are same with original. Print 2test_motherboardCover_single4020Fan.STL to see if your fan fits.…
This is a Air tight box . Contains 3 different part. 1. Bottom part prints with PLA or other plastic 2 top lid part - Print with PLA or similar plastic. 3. Gasket - use TPU , and TPC material to print Rubber-like material. (Please use…
Replacement plastic foot for domestic aluminium ladder with three steps and 40x20mm profile. In order not to reduce the strength of the foot, it is pressed horizontally as it is for loading the model. Printing without supports - the model…
