1 / 7
Creality Ender 3 v2 - Clean Shroud (40x20mm Fan & Stock 4010 Blower) — zdjęcie 1
1 / 7

Creality Ender 3 v2 - Clean Shroud (40x20mm Fan & Stock 4010 Blower)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This replaces the original Shroud For 40x25mm Hot-End Fan and the stock 4010 Blower Fan! I made a new shroud from…

Ocena
5 / 5
Polubienia
27
Pobrania
202
Wydruki
2
Wyświetlenia
2105
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This replaces the original Shroud

For 40x25mm Hot-End Fan and the stock 4010 Blower Fan!

I made a new shroud from scratch for a upgraded 40x25mm Hot-End Fan and the stock 4010 Blower Fan (and its mounting) for Creality Ender-3 V2.

The screw holes are smaller so you can use small wood screw or similar.

  • Update 2022-01-24: Small adjustments made to the Main Shroud, larger Shroud Cover for a snug fit.
  • Update 2022-01-30: I printed the model and everything fits just fine. You can still use the original screws, but you will have to heat one screw with a lighter and gently screw in it in the hole, this will thred the hole. Then gently screw it out and let everything cool.
  • Print the Shroud Cover with the Creality-logo faceing up!
  • Print the Shroud so you have the open side up, and the front side down. Use supports (10% Zig-Zag)!

Fasten the Cover to the Shroud with double sided tape, after you mounted the 40x20mm fan.

I hope everything will fit!

Happy Printing!

Print Settings

Supports:

Yes

Resolution:

0.12, 0.16, 0,2

Infill:

100%

Filament:

Any PETG, ABS, PLA

Any


Notes:

Use a Filament Material that handle higher temp.

Category: 3D Printer Parts

Tagi