Creality Ender 3 v2 - Clean Shroud (40x20mm Fan & Stock 4010 Blower)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This replaces the original Shroud For 40x25mm Hot-End Fan and the stock 4010 Blower Fan! I made a new shroud from…
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 202
- Makes
- 2
- Views
- 2,105
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This replaces the original Shroud
For 40x25mm Hot-End Fan and the stock 4010 Blower Fan!
I made a new shroud from scratch for a upgraded 40x25mm Hot-End Fan and the stock 4010 Blower Fan (and its mounting) for Creality Ender-3 V2.
The screw holes are smaller so you can use small wood screw or similar.
- Update 2022-01-24: Small adjustments made to the Main Shroud, larger Shroud Cover for a snug fit.
- Update 2022-01-30: I printed the model and everything fits just fine. You can still use the original screws, but you will have to heat one screw with a lighter and gently screw in it in the hole, this will thred the hole. Then gently screw it out and let everything cool.
- Print the Shroud Cover with the Creality-logo faceing up!
- Print the Shroud so you have the open side up, and the front side down. Use supports (10% Zig-Zag)!
Fasten the Cover to the Shroud with double sided tape, after you mounted the 40x20mm fan.
I hope everything will fit!
Happy Printing!
Print Settings
Supports:
Yes
Resolution:
0.12, 0.16, 0,2
Infill:
100%
Filament:
Any PETG, ABS, PLA
Any
Notes:
Use a Filament Material that handle higher temp.
Category: 3D Printer Parts