Molex Microfit 3.0 - Half of a 2x2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to access the 24v power usually used for the Bambu AMS system.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 204
- Wydruki
- 0
- Wyświetlenia
- 1544
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Update: the original file may appear at 10x scale in your slicer. I've uploaded a .3mf with the correct scaling but you can also just set your scale to 0.10. The correct scaled height is 14mm.
The Bambu X1 and P1P have a 4 pin connector on the back usually utilized for the AMS system. I don't have one but wanted to hook up some 24v lighting and a filtered air intake fan using the 4 pin connector. Not needing the other 2 pins, I took a Molex Microfit 3.0 2x2 connector and cut it in half (you can't use the 2 pin connector that is part of the microfit ecosystem because the pins have a particular shape that doesn't allow the 2 pin connector to plug into a 4 pin port). This connector isn't perfect - the pins will not click/lock in place - but it works well enough with just friction holding everything in place.