1 / 5
Molex Microfit 3.0 - Half of a 2x2 — image 1
1 / 5

Molex Microfit 3.0 - Half of a 2x2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Used to access the 24v power usually used for the Bambu AMS system.

Rating
5 / 5
Likes
19
Downloads
204
Makes
0
Views
1,547
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Public Domain

Update: the original file may appear at 10x scale in your slicer.  I've uploaded a .3mf with the correct scaling but you can also just set your scale to 0.10.  The correct scaled height is 14mm.

 

The Bambu X1 and P1P have a 4 pin connector on the back usually utilized for the AMS system.  I don't have one but wanted to hook up some 24v lighting and a filtered air intake fan using the 4 pin connector.  Not needing the other 2 pins, I took a Molex Microfit 3.0 2x2 connector and cut it in half (you can't use the 2 pin connector that is part of the microfit ecosystem because the pins have a particular shape that doesn't allow the 2 pin connector to plug into a 4 pin port).  This connector isn't perfect - the pins will not click/lock in place - but it works well enough with just friction holding everything in place.