Spool Holder for SOVOL SV06 3d printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple locking spool holder that mounts over the SV06 existing spool holder.
- Ocena
- 4,8 / 5
- Polubienia
- 160
- Pobrania
- 1103
- Wydruki
- 35
- Wyświetlenia
- 6579
- Oceny
- 30
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple spool holder for the SV06. I designed this spool holder specifically for the SV06 3D printer, but it might work on others. This spool holder mounts over the existing spool holder. To install, temporarily remove the tube from the existing spool holder, and place the two-piece 3D-printed collar around it with threads towards the mounting end. Now screw in the main 3D-printed tube to lock the two-piece collar in place ( use the small screwdriver that came with the SV06 to hold the collar and tighten the main tube ). Mount the assembled spool holder back onto the spool holder arm on the SV06, and you're done. This is a very easy print, and you don't need supports. Please post your makes.
Update:
Added file "SV06_Spool_Holder_extended_nut_med_res_V1.stl"
This should make it easier to use with spools that have an inset.
Update: 02/28/23
Added file "SV06_Spool_Holder_Sunlu_Adapter_med_res_V1.stl"
This is an add-on that accommodates Sunlu spools with an inner diameter of 72mm.
See the video for installation instructions.