1 / 7
BTT EBB42 Mount - Eva 3.x - Orbiter 2.x & LGX Lite & Sherpa Mini — zdjęcie 1
1 / 7

BTT EBB42 Mount - Eva 3.x - Orbiter 2.x & LGX Lite & Sherpa Mini

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

BTT EBB42 for the Eva 3.x with Orbiter 2.x or LGX Lite or Sherpa Mini extruder.

Ocena
5 / 5
Polubienia
109
Pobrania
906
Wydruki
5
Wyświetlenia
5510
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder.

Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside.

Piano wire can be secured with a M3 grub screw.

For the heat insert version you need 3mm spacer for the EBB42.

Cable tie channels to secure USB-C and power supply connector and cables.

I suggest to use brass spacer. If you don't have some you can use the printed version, but you the length must be adjusted to your needs. Provided 20mm length should fit with an Orbiter. Due to user feedback the LGX Lite Version must be shorter. M3 by 4mm heat inserts are needed.

2023-03-12:
- 7mm diameter spacer (instead of 8mm) added
- Endstop Spacer for RatRig VCore added

2023-04-25:
- Complete Redesign to make the holder more rigid and variable for other extruder
- Mounting holes for Orbiter 2.x corrected

2023-04-25:
- Heat Insert Version added

2023-04-26:
- LGX Lite versions added for all variants

2023-05-08:
- Sherpa Mini version added for all variants

2023-05-16:
- LGX Lite version updated due to an design issue

Tagi