ZOHD Dart250g - air scoop with cutting helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to create my own design, cause all I found was not stable enough and therefore I don't wanted to cut a hole in…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Wanted to create my own design, cause all I found was not stable enough and therefore I don't wanted to cut a hole in my Dart250 cover.
My version does not really differ from others, but has a collar at the edge to fit better. This is also helpful for glueing this thing.
To cut the contour, I provide a little helper within this thing.
Cut the shape and then deepen it until the scoop fits perfect. Glue and a press it... finished.
The scoop is 26mm wide and 28mm long. May fit for other models too!
Have fun!