Galaxy on Orion's Belt With Stand (Men in Black)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptation of Galaxy on Orion's belt from Men in Black movie. Made for easy printing without supports. Includes stand.
- Ocena
- 5 / 5
- Polubienia
- 110
- Pobrania
- 210
- Wydruki
- 3
- Wyświetlenia
- 1426
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
Fully printable adaptation of Galaxy on Orion's belt from Men in Black movie. Made for easy printing without supports. Includes stand. No glue needed. The model consists of four main parts and three stand parts, which is printed separately. I printed it on MINI+ with 0,4mm nozzle and PLA.
Print info
Upper needs to be printed with 100% infill.
Lower needs to be printed with 100% infill, but you can use modificator to set default 15% infill (gyroid) for bottom flange.
Connector and Hang need to be printed with 100% infill.
Galaxy, Pillar and Stand can be printed with just 10% gyroid infill.
Material: PLA
Nozzle: 0,4mm
Layer: 0,2mm
Supports: NO
Print time: 11h 8m
Weight: 137g
Assembly
Simply use Connector ring to fix Upper and Lower part together. You can put inside Galaxy or some goody. Pillar needs to be plugged into stand. Use hang to connect Galaxy with stand.
Thank you for downloading and like.
