1 / 5
The best Bambulab Glass Top Led Raiser mod — zdjęcie 1
1 / 5

The best Bambulab Glass Top Led Raiser mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model allows you to use 12MM ledstript inside your bambulab printer enclosure

Ocena
4,875 / 5
Polubienia
258
Pobrania
2722
Wydruki
9
Wyświetlenia
13 487
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I remade the model in fusion and made it so to allow me to add the ledstrip that i bought from aliexpress,
I hooked the ledstrip up to a custom PCB which can controll the RGBCT from homeassistant and will clone the Bambulab Ledstate from MQTT
Make sure you print this either with Nylon or ABS so itcan withstand the heat from the ledstrip and the heat from the enclosure.

Tagi