Headphone holder Logitech-G
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headpohne holder with Logitech G logo
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 176
- Wydruki
- 1
- Wyświetlenia
- 706
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
If you like this model and decide to print it, post a make/like the model,
it always makes me happy!
Made for my logitech G733 headphones, but it can be used for many others (as seen on pic.)
Its meant to be mounted on shelf.
edit:
‣ Supports are optional, as one maker mentioned in makes & comments section
Supports (optional):
You can see print position on the picture, i had no problems with supports in threaded hole. If you have new prusa slicer (v 2.6.0), you can use organic supports for example.Material: PLA (or whatever you prefer)Layer height: 0.2mm Nozzle: 0.4mmSupports: Optional (in threaded hole)