40 series profile Quick Release Flight Throttle mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This throttle mount is designed to allow a piece of 40 series profile to slide on using a 2 bolt economy nut.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
April 14, 2023: Updated with new version V8 that has larger bolt heads for the long bolts
This mount bolts to Sparco seat brackets with 8mm bolts.
The Fusion 360 file is included to make modifications.
I have it slightly rotated counter clockwise and up a couple degrees towards me in the seat.
It will fit 40 series profile and a 2 bolt economy nut.
I used two M8 knobs to tighten the nut.
It uses 3 M8 bolts at the bottom and 2 x 110mm-125mm M8 bolts at the top to secure it to my seat bracket.
The long top bolts are used for structural rigidity.
I printed it bolt holes down with 30% infill, 4 walls, and 4 top and bottom layers.