1 / 6
Sample Filament Spool Holder (Configurable)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sample Filament Spool Holder I focused on three issues based on reviewing the designs of others: 1) I wanted to…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 265
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Sample Filament Spool Holder
I focused on three issues based on reviewing the designs of others:
- I wanted to accommodate spool samples of different diameters and spool holders of different diameters;
- I wanted the spool holder to separate easy (magnets)
- I wanted the sample holder to stow away easily for storage.
Filament
- OVERTURE PLA+ - Light Grey
Printers
- Snapmaker 2.0 Modular 3-in-1 3D Printer A350T
- AnkerMakeM5 3D Printer.
Notes:
- You Need to print two (2x) of each part (A&B)
- I welcome any and all feedback. I've also attached the Fusion360 model which allows you to modify the parameters or tweak to your own liking.
Post Printing:
- Need to add (glue) four (4x) 8mm magnets into the slots on the inner part of each sample spool holder half.
Print Settings
Printer:
Snapmaker 2.0 A350 & AnkerMake M5
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
35 (likely more infill than necessary, but I prefer strong prints)