1 / 15
TEVO Tarantula - Linear bearings, Y belt tensioner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mod will require: 2x 10mm H6 rods (500mm length) 4x SMA SCS 10 UU 16x M5 12mm screws with angled head (to mount…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
This mod will require:
- 2x 10mm H6 rods (500mm length)
- 4x SMA SCS 10 UU
- 16x M5 12mm screws with angled head (to mount bearings to base)
- 8x M6 20mm screws to hold down rods
- 4x M6/M5 12mm flat head screws with nuts (to mount table base plate to printed base, you can drill down plate it self to match bearings... I failed with that)
- 1x M5 40mm (up to 60mm) screw with nut head and nut for belt tensioning
- 2x M4 50mm
- Parts that already exist with the printer (M4/M5 screws, T nuts and others)
- Patience :D
Category: 3D Printer Parts
