1 / 15
TEVO Tarantula - Linear bearings, Y belt tensioner — image 1
1 / 15

TEVO Tarantula - Linear bearings, Y belt tensioner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This mod will require: 2x 10mm H6 rods (500mm length) 4x SMA SCS 10 UU 16x M5 12mm screws with angled head (to mount…

Rating
0 / 5
Likes
9
Downloads
61
Makes
0
Views
495
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This mod will require:

  • 2x 10mm H6 rods (500mm length)
  • 4x SMA SCS 10 UU
  • 16x M5 12mm screws with angled head (to mount bearings to base)
  • 8x M6 20mm screws to hold down rods
  • 4x M6/M5 12mm flat head screws with nuts (to mount table base plate to printed base, you can drill down plate it self to match bearings... I failed with that)
  • 1x M5 40mm (up to 60mm) screw with nut head and nut for belt tensioning
  • 2x M4 50mm
  • Parts that already exist with the printer (M4/M5 screws, T nuts and others)
  • Patience :D

Category: 3D Printer Parts

Tags