1 / 4
Front Panel Variants for Ephyxis' Compact ATX Case — zdjęcie 1
1 / 4

Front Panel Variants for Ephyxis' Compact ATX Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Several front panel variants for Ephyxis' ATX Case. Accommodates larger GPU, 19mm switch.

Ocena
0 / 5
Polubienia
46
Pobrania
194
Wydruki
0
Wyświetlenia
4790
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

 

These variants of the front panel were modified from Ephyxis' graciously provided step files.  You will need longer countersink bolts for the front panel if using the 10mm extension variant. 

 

The extended versions support a maximum GPU length of 273mm (+10mm from the original design).  I've also included a mount hole for a momentary switch in the non-slot versions and I plan to update this model page with an insert for the slot version and updated non-slot versions that will fit a front IO panel.

 

You can modify the step file or fusion files if you need additional extension, or leave a comment and I can upload additional variants as requested.

 

I had good success printing with a 0.6mm nozzle at 0.3mm layer height and 0.675 line width.  With a Dragon HF and CHT nozzle, the 10mm extension & 19mm hole variant took around 4h 30m to print and used around 200g of filament.

Tagi