1 / 10
Ratrig 2.0 Enclosure braces for 3030 spare parts — zdjęcie 1
1 / 10

Ratrig 2.0 Enclosure braces for 3030 spare parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use up the spare parts that come with 2.0 enclosures or when upgrading to the 2.0 enclosure.

Ocena
0 / 5
Polubienia
42
Pobrania
151
Wydruki
0
Wyświetlenia
1133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is something I came up with to use up the 610mm long 3030 frame parts from my unenclosed 3.1 when I upgraded it to the 2.0 enclosure. I believe that all ratrig printers still come with these extra parts for this should work on all the printer sizes. 

 

For the bolts use 6x14mm. I found those reach through the 3mm poly metal base I made but you do not have any paneling on the bottom the supplied 6x12 bolts will work fine. 

 

To secure the 3030 to the corner brackets you can use 3mm set screws. Any length works well. The fit is very snug so there is little room for it to vibrate anyway. 

 

Tagi