Dual Relay Mounting Plate with DIN Rail mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual Relay (two single relays) mounting plate with a DIN rail mount - Designed for Voron power control
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 636
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I needed a way to mount two single relays under my Voron 2.4R2 to allow the Raspberry Pi to control printer power. I added a simple mounting plate to SQ9MDD's DIN clamp - Works great - there is just enough room on the rail of a 350mm Voron for the 5V power supply, 24V power supply, SCR, and these 2 relays.
The DIN clamp has been modified to allow for direct threading of two M3 screws from the mounting plate into the DIN clamp. Relays are attached in two corners with M3 screws and retained with pins in the other two corners.
Fusion 360 file is enclosed for your modding enjoyment.