Llama! (Multi-Extruder Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of DigitalMeetsWorld's Llama that has been cut into separate pieces for multi-extruder printing.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 701
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of DigitalMeetsWorld's Llama that has been cut into separate pieces for multi-extruder printing.
Please be aware that this remix was not designed to be printed in pieces on a single-extruder machine and assembled afterwards. Use DigitalMeetsWorld's original model to get everything at once in a single colour.
Print instructions
The print in the cover photo was done on a quad extruder Prusa i3 MK2 MMU as follows:
- llama_body.stl Monoprice brown PLA (extruder 1)
- llama_patches.stl MG Chemicals gold PLA (extruder 2)
- llama_eyes_white.stl Prusa white PLA (extruder 3)
- llama_eyes_black.stl MG Chemicals black PLA (extruder 4)
I printed my llama scaled down to 75%, which measures roughly 60mm x 128mm x 123mm. If you're going to scale it down more than that, pay close attention to your slicer settings and preview before printing - the details in the area around the eyes, and between the snout and eye patches can get sketchy if you go too small.
Happy printing!