Llama! (Multi-Extruder Remix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of DigitalMeetsWorld's Llama that has been cut into separate pieces for multi-extruder printing.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 53
- Makes
- 1
- Views
- 701
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of DigitalMeetsWorld's Llama that has been cut into separate pieces for multi-extruder printing.
Please be aware that this remix was not designed to be printed in pieces on a single-extruder machine and assembled afterwards. Use DigitalMeetsWorld's original model to get everything at once in a single colour.
Print instructions
The print in the cover photo was done on a quad extruder Prusa i3 MK2 MMU as follows:
- llama_body.stl Monoprice brown PLA (extruder 1)
- llama_patches.stl MG Chemicals gold PLA (extruder 2)
- llama_eyes_white.stl Prusa white PLA (extruder 3)
- llama_eyes_black.stl MG Chemicals black PLA (extruder 4)
I printed my llama scaled down to 75%, which measures roughly 60mm x 128mm x 123mm. If you're going to scale it down more than that, pay close attention to your slicer settings and preview before printing - the details in the area around the eyes, and between the snout and eye patches can get sketchy if you go too small.
Happy printing!