1 / 7
Fiat seat console cover back (OEM part# 60911739) - repair part for lower hook — zdjęcie 1
1 / 7

Fiat seat console cover back (OEM part# 60911739) - repair part for lower hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It's easy to break the lower hooks during disassembly of the cover - especially on the first attempt, when you not…

Ocena
0 / 5
Polubienia
4
Pobrania
30
Wydruki
0
Wyświetlenia
481
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

It's easy to break the lower hooks during disassembly of the cover - especially on the first attempt, when you not know where to pull and where to push.

This part fixes a broken hook for a fraction of the cost of a new cover.

The stump of the broken hook needs to be prepared as shown in the pictures:

  • the rest of the hook needs to be cut flush
  • 3 mm of the small bar directly over the hook needs to be removed

The part is designed to fit flush, I had to push it in with some force.

I used a drop of CA on the small faces of the hook - just enough to hold in place, but still possible to remove the part entirely should it break again.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Yes

Resolution:

0.2mm

Infill: 

30%

Filament: Prusa PETG 
 

Notes:

 

• place sideways on bed (see picture of sliced object)
• use a lot of perimeters for strengths - I printed with 5 perimeters

At least one user reported success printing it with the hook facing upwards and without supports.

Post-Printing

Supports between the small gap need to be removed with cutter - be careful with your fingers!

 

 

 

 

Category: Automotive

Tagi