1 / 7
Fiat seat console cover back (OEM part# 60911739) - repair part for lower hook — image 1
1 / 7

Fiat seat console cover back (OEM part# 60911739) - repair part for lower hook

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

It's easy to break the lower hooks during disassembly of the cover - especially on the first attempt, when you not…

Rating
0 / 5
Likes
4
Downloads
30
Makes
0
Views
481
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

It's easy to break the lower hooks during disassembly of the cover - especially on the first attempt, when you not know where to pull and where to push.

This part fixes a broken hook for a fraction of the cost of a new cover.

The stump of the broken hook needs to be prepared as shown in the pictures:

  • the rest of the hook needs to be cut flush
  • 3 mm of the small bar directly over the hook needs to be removed

The part is designed to fit flush, I had to push it in with some force.

I used a drop of CA on the small faces of the hook - just enough to hold in place, but still possible to remove the part entirely should it break again.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Yes

Resolution:

0.2mm

Infill: 

30%

Filament: Prusa PETG 
 

Notes:

 

• place sideways on bed (see picture of sliced object)
• use a lot of perimeters for strengths - I printed with 5 perimeters

At least one user reported success printing it with the hook facing upwards and without supports.

Post-Printing

Supports between the small gap need to be removed with cutter - be careful with your fingers!

 

 

 

 

Category: Automotive

Tags