1 / 1
Yet another TUSH - one piece with printed axles and spool guides — zdjęcie 1

Yet another TUSH - one piece with printed axles and spool guides

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This one is assembled from a stable base, two printed axles and spool guides.

Ocena
5 / 5
Polubienia
12
Pobrania
52
Wydruki
3
Wyświetlenia
300
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Print the guiding rims and axles with 5 walls and 50% infill.

For a whole set of two spoolholders, print

  • 2x base
  • 4x axle
  • 4x rim

The rims and axles should be a tight fit, but not need excessive force to be pushed over the bearings re. into the base and bearing. If in doubt, print a sample rim / bearing to test the assembly.

The axles could be replaced with four M8x20 screws and nuts if you are not comfortable with them.

BOM:
Filament used

Tagi