1 / 1
Yet another TUSH - one piece with printed axles and spool guides
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This one is assembled from a stable base, two printed axles and spool guides.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 52
- Makes
- 3
- Views
- 299
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Print the guiding rims and axles with 5 walls and 50% infill.
For a whole set of two spoolholders, print
- 2x base
- 4x axle
- 4x rim
The rims and axles should be a tight fit, but not need excessive force to be pushed over the bearings re. into the base and bearing. If in doubt, print a sample rim / bearing to test the assembly.
The axles could be replaced with four M8x20 screws and nuts if you are not comfortable with them.
BOM:
- 4x bearings 608ZZ, e.g. from Amazon: https://amzn.to/3ZtLnap (affiliate link)
Filament used
- Extrudr PLA NX2 black https://www.extrudr.com/de/produkte/catalogue/pla-nx2-schwarz_1966/
- Extrudr PLA NX2 silver https://www.extrudr.com/de/produkte/catalogue/pla-nx2-silber_1972/
