30 degree angled spool holder 2020 kossel mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wasn't satisfied with the stock acrylic spool holder that came with the 2020 kossel mini kit from folgertech.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wasn't satisfied with the stock acrylic spool holder that came with the 2020 kossel mini kit from folgertech. It was sticking out quite a bit more than needed, and made of two parts. Additionally I wanted to feed the extruder motor (which I mounted on the lower rail with a bracket I designed for that purpose) in a more direct path, so the arm is rotated 30 degrees.
Print instructions
Category: 3D Printer Parts Summary
I wasn't satisfied with the stock acrylic spool holder that came with the 2020 kossel mini kit from folgertech. It was sticking out quite a bit more than needed, and made of two parts. Additionally I wanted to feed the extruder motor (which I mounted on the lower rail with a bracket I designed for that purpose) in a more direct path, so the arm is rotated 30 degrees.
Print Settings
Printer: FolgerTech Kossel Mini
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 15%
Notes:
I printed this upside so that the support structure is on the top. It leaves a little bit of a rough surface but that doesn't affect unwinding of the spool at all.
Post-Printing
Mounting
When mounting this, it snaps on the rail. For added security, I used an allen hex key in the channel behind the holder to keep a T-nut at the right height, then screwed in an M3 bolt.