30 degree angled spool holder 2020 kossel mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wasn't satisfied with the stock acrylic spool holder that came with the 2020 kossel mini kit from folgertech.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 54
- Makes
- 0
- Views
- 505
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I wasn't satisfied with the stock acrylic spool holder that came with the 2020 kossel mini kit from folgertech. It was sticking out quite a bit more than needed, and made of two parts. Additionally I wanted to feed the extruder motor (which I mounted on the lower rail with a bracket I designed for that purpose) in a more direct path, so the arm is rotated 30 degrees.
Print instructions
Category: 3D Printer Parts Summary
I wasn't satisfied with the stock acrylic spool holder that came with the 2020 kossel mini kit from folgertech. It was sticking out quite a bit more than needed, and made of two parts. Additionally I wanted to feed the extruder motor (which I mounted on the lower rail with a bracket I designed for that purpose) in a more direct path, so the arm is rotated 30 degrees.
Print Settings
Printer: FolgerTech Kossel Mini
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 15%
Notes:
I printed this upside so that the support structure is on the top. It leaves a little bit of a rough surface but that doesn't affect unwinding of the spool at all.
Post-Printing
Mounting
When mounting this, it snaps on the rail. For added security, I used an allen hex key in the channel behind the holder to keep a T-nut at the right height, then screwed in an M3 bolt.