HKSB110 Car Speaker Adapter (Select 2006-2021 Hyundai and KIA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
American International mounting plate/adapter for 6.5" / 6.75" car speakers for many Hyundai and KIA (check Crutchfield)
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 345
- Wydruki
- 1
- Wyświetlenia
- 1457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I modeled this with dimensions taken from the official part. I have not used it for my install as I also modeled a custom version to exact fit my Kia Niro / JBL speakers.
Update 3/14/23: I printed a piece to compare and my measurements were undersized by 1-2mm (yikes!) I imagine the old model will worked fine, but I've updated both files and added another stl with a flat/stiffer base that should still work on most every application and be much easier to gasket/seal.
Print with ABS/ASA (since cars get hot, duh). Supports (and probably brim) needed.
Add a negative cylinder in center to remove small inner tabs you may not need.
STEP file also available to remove holes/tabs.