Illuminated Polarscope for Arca-Swiss
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Polarscope with LED, battery and switch for arca-swiss
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Illuminated polarscope with arca-swiss
I use this polarscope for my small Keen-One-EQ mount, which does not have a polarscope itself and the tripod with polar wedge has an Arca-Swiss clamp. Before the mount is put on the tripod, I first mount this polarscope and north-align it. Then the rest will be built.
This model offers a very compact housing for the Polarscope and has a battery compartment with a switch for the Polarscope lighting at the bottom of the Arca-Swiss connection.
Print settings:
- No supports needed.
- Layer height for housing: 0.15mm, 4 perimeter, 30% cubic infill
- Layer height for rear dust cap: 0.1mm (very fine thread)
BOM:
- polarscope: https://skywatcher.com/product/polar-scope-eq6eq5/
- CR2032 batteryholder: https://amzn.eu/d/7BlFKL9
- CR2032 battery
- 3mm LED red
- resistor 1K or more
- 14 magnets 5x2 https://amzn.eu/d/7mnBTW4
More details
I wrote a blog post with more details on my AstroBlog:
German:
https://astrophoto.lionbit.com/3d-druck/24-polarscope-mit-beleuchtung-und-arcaswiss
English:
Happy printing!