Multimedia Key Deck Base Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Made some minor preference changes to the Multimedia Key Deck.
Made the bottom deeper so there is more room for the wires.
Added a chamfer so support would not be needed on the upper lip.
Cut clearance for the board of the encoder.
Added a slot so the Pro Micro can be removed with a screwdriver.
Chamfered around the Micro USB hole.
Update 03/12/2023:
Uploaded V1.3 which has some more minor model changes .
Uploaded C1.1 which is for use with a type C Pro Micro (mine was 3mm longer than my Micro USB Pro Micro)
Update 03/29/2023:
QMK/VIA firmware is now publicly available, see here.
Update 04/02/2023:
Added a soldering jig to hold everything in place and figure out wire lengths.
Added C1.1.R which has a hole for a 6mm reset switch.