Multimedia Key Deck Base Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Made some minor preference changes to the Multimedia Key Deck.
Made the bottom deeper so there is more room for the wires.
Added a chamfer so support would not be needed on the upper lip.
Cut clearance for the board of the encoder.
Added a slot so the Pro Micro can be removed with a screwdriver.
Chamfered around the Micro USB hole.
Update 03/12/2023:
Uploaded V1.3 which has some more minor model changes .
Uploaded C1.1 which is for use with a type C Pro Micro (mine was 3mm longer than my Micro USB Pro Micro)
Update 03/29/2023:
QMK/VIA firmware is now publicly available, see here.
Update 04/02/2023:
Added a soldering jig to hold everything in place and figure out wire lengths.
Added C1.1.R which has a hole for a 6mm reset switch.