Sofar ME3000SP battery cable cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a Sofar and the battery cables I have are too thick to bend down vertically inside the supplied cover
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
This is a cover a made to replace the standard cover for the Sofar ME3000SP solar hybrid battery inverter. The cables I have are too thick to bend vertically and fit in the existing cover. This cover has a lower profile and the cables exit sideways from the cover rather than vertically. The only issue is that the screw holes sit directly above where the cables exit. If this bothers you, you can easily connect the two holes after printing with a scalpel. This will allow you to install the two screws.
The cable holes are 20mm so you can use glands if you like.