Sofar ME3000SP battery cable cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have a Sofar and the battery cables I have are too thick to bend down vertically inside the supplied cover
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
This is a cover a made to replace the standard cover for the Sofar ME3000SP solar hybrid battery inverter. The cables I have are too thick to bend vertically and fit in the existing cover. This cover has a lower profile and the cables exit sideways from the cover rather than vertically. The only issue is that the screw holes sit directly above where the cables exit. If this bothers you, you can easily connect the two holes after printing with a scalpel. This will allow you to install the two screws.
The cable holes are 20mm so you can use glands if you like.