1 / 8
ING Logo Inlay Version — zdjęcie 1
1 / 8

ING Logo Inlay Version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The ING Logo. Print the two parts in orange and white and press them together.

Ocena
1 / 5
Polubienia
5
Pobrania
238
Wydruki
1
Wyświetlenia
2034
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The ING Logo. Print the two parts in orange and white and press them together. 

I started from the commonly available PNG file and created a vector version using Inkscape. I loaded the SVG file into Fusion360 to extrude the white and orange components. The SVG file is included so you can also try this out for yourself. 

Depending on your printer's dimensional accuracy you might need to play with the scaling percentages. I printed both colors at 150% scale and they fit with a bit of force (rubber hammer). 

You will need to glue in the orange part between the right two whiskers, and potentially the orange part connecting the right ear to the right whiskers.

Suggested print settings:

  • Material: Something matte, I used eSun ABS+ but PLA / PETG / … will be fine
  • Top layers: 5 for a clean finish
  • Perimeters: 3 so no see through effect
  • Infill: 10%. You can vary this, more gives more rigidity. 

Tagi