1 / 8
ING Logo Inlay Version — image 1
1 / 8

ING Logo Inlay Version

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The ING Logo. Print the two parts in orange and white and press them together.

Rating
1 / 5
Likes
5
Downloads
237
Makes
1
Views
2,030
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

The ING Logo. Print the two parts in orange and white and press them together. 

I started from the commonly available PNG file and created a vector version using Inkscape. I loaded the SVG file into Fusion360 to extrude the white and orange components. The SVG file is included so you can also try this out for yourself. 

Depending on your printer's dimensional accuracy you might need to play with the scaling percentages. I printed both colors at 150% scale and they fit with a bit of force (rubber hammer). 

You will need to glue in the orange part between the right two whiskers, and potentially the orange part connecting the right ear to the right whiskers.

Suggested print settings:

  • Material: Something matte, I used eSun ABS+ but PLA / PETG / … will be fine
  • Top layers: 5 for a clean finish
  • Perimeters: 3 so no see through effect
  • Infill: 10%. You can vary this, more gives more rigidity. 

Tags