trigger mechanism for bungee plane launcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple automatic servo controlled trigger mechanism for bungee plane launcher The "crossbow style" trigger mechanism…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 763
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
A simple automatic servo controlled trigger mechanism for bungee plane launcher
The "crossbow style" trigger mechanism is controlled via 30kg RC servo
This "e-pedal" can be controllerd electronically by any micro controller allowing to setup fully automatic flywings or planes launcher.
See it here : https://youtu.be/WiMVHB2DOCs
Don't forget to insert a metal cord acting as a spring for pull back lock mechanism.
I have tested it with 10kg pull. Should go much further but not enough milk packs to test !
Printed with plastic bottle PET filament : https://hackaday.io/project/185196-pullstruder-from-plastic-bottle-to-pet-filament
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
.3mm
Infill:
20
Filament: none PET blue plastic bottle
Category: R/C Vehicles