Filament rack, Filament-Regal von 2 bis 10 Rollen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filamentaufbewahrung ist so eine Sache. Ich benutze öfters mal unterschiedliche Farben und Filamente. Daher habe ich…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 164
- Wydruki
- 1
- Wyświetlenia
- 1202
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Filamentaufbewahrung ist so eine Sache. Ich benutze öfters mal unterschiedliche Farben und Filamente. Daher habe ich mich entschlossen, ein kleines Sortiment immer parat zu haben und entschloss mich hierfür ein Wandregal zu gestalten.
Es besteht aus der Konsole und 18 Cu-Rohr (L= 1,0 m) und der Endkappe. Die Befestigung der Konsolen muss man je nach Wandkonstruktion wählen. Das Rohr je nach Wunsch kürzen bzw. nach Spulenanzahl wählen. Man kann die Rohre noch mit einer Schraube M6 fixieren. Das macht dann bei längeren Regalen Sinn. Ich habe darauf verzichtet.
Ich benutze zusätzlich eine Rollenaufnahme, um direkt aus dem Regal zu drucken. https://www.thingiverse.com/thing:4845552
Für den Sidewinder X1 / Genius habe ich mir hierfür eine Filamentführung konstruiert, die es auch erlaubt, weiterhin den Sensor zu verwenden. https://www.thingiverse.com/thing:4845619 (Sidewinder X1) https://www.thingiverse.com/thing:4845629 (Genius)
Filament storage is one thing. I often use different colors and filaments. Therefore, I decided to have a small assortment always ready and decided to create a wall shelf for this.
It consists of the console and 18 Cu-tube (L= 1,0 m) and the end cap. The mounting of the brackets you have to choose depending on the wall construction. Shorten the tube according to your wish or choose according to the number of coils. You can fix the tubes with a screw M6. This makes sense for longer shelves. I have dispensed with this.
I also use a roll holder to print directly from the shelf. https://www.thingiverse.com/thing:4845552
For the Sidewinder X1 / Genius I have constructed a filament guide for this, which also allows to continue to use the sensor. https://www.thingiverse.com/thing:4845619 (Sidewinder X1) https://www.thingiverse.com/thing:4845629 (Genius)
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0,4
Infill:
25
Filament:
No Name PLAwhite
Notes:
Ich drucke so massive Teile mit einer 0,8 Düse und kann das nur empfehlen. Die Endkappen hingegen sind mit einer 0,4 Düse gedruckt.
I print such massive parts with a 0.8 nozzle and can only recommend this. The end caps, on the other hand, are printed with a 0.4 nozzle.Category: 3D Printer Accessories