LayersFactory
Zgłoś model
1 / 6
Vegetable peeler handle — zdjęcie 1
1 / 6

Vegetable peeler handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

My 15-year old Boerner (Börner) peeler broke, so I created a similar handle to work with the blade, which is still good after all this time.

Note that I did not include any of the other features of the original peeler, e.g. coring, etc. since I only use this tool to peel vegetables.

Printer settings:

  • Layer height: I printed it with 0.15 mm layer height, but 0.2 mm should work without issues
  • Filament: I printed it in Prusament Jet Black PETG, but PLA should work without issues
  • Infill: 15%, gyroid. More infill will make the handle less flexible
  • Supports: Yes, for the blade-holding parts and the holes where the blade ends go into. Regular supports were very easy to remove

Also on Thingiverse: https://www.thingiverse.com/thing:5886871

Update 2023-03-08: Added STEP file.

Update 2023-06-27: Renamed the .STL file and added a .gcode

Tagi

kitchenhandlekitchenwarekitchentoolpeeler