Mouse Logitech G900 Rear Button Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces rear button on the Logitech G900 mouse
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 355
- Wydruki
- 0
- Wyświetlenia
- 1304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- GNU General Public License v3.0
These buttons, or more accurately button adapters or extenders, can easily fall off during transportation or if dropped (so I've discovered).
Rather than buy a new mouse or mouse adapters I grabbed some calipers and got to work in Blender.
The gcode is meant for Prusa Mini+ PLA. This includes the negative volume for the screw required for the magnet to hold this button in place.
Otherwise you can include your own negative cylinder for a screw you find lying around.
Personally, I found this screw, it has a 2mm shank, but the head was too wide to fit in the gap on the mouse; I had to grind that down to ~2mm as well. A very very small screw is required, or some bit of metal embedded in the print to allow the magnet in the mouse to hold.