1 / 5
3030 Filler Roller Holder + AdamV3D Spool Holder Mashup — zdjęcie 1
1 / 5

3030 Filler Roller Holder + AdamV3D Spool Holder Mashup

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mashup of the Filler Roller Holder and AdamV3D's 2KG Spool Holder for the V-Minion for 3030 extrusions.

Ocena
0 / 5
Polubienia
5
Pobrania
28
Wydruki
0
Wyświetlenia
393
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I really like HugoG's brilliant Filler spool holder system and adapted it for my Rat Rig V-Minion as a “mashup” of the standard Filler holder and AdamV3D's 2KG V-Minion Spool Holder (available at: RR-V-Minion-Mods/2kg or Larger Spool Holder at main · AdamV3D/RR-V-Minion-Mods · GitHub). This should also work great on the Rat Rig V-Core 3.1 as well as any printer with a 3030 t-slot extrusion. My V-Core just arrived and has yet to be assembled but I will verify once it is running and report back!

I have done test prints with both PETG and PLA+ using 30% infill with supports. Print it on its side and use a brim or raft if necessary for your printer. 

Remember this is just the holder for the Filler Roller. You will also need to print a roller and source the skate bearings. See HugoG's Filler for the details: Filler - Filament Holder by HugoG

It mounts on a 3030 t-slot extrusion using two M5x16 screws with M5 t-slot nuts. 

If you are installing this on a Rat Rig V-Minion also note that you will need to move the 3030 extrusion to project from the left side of the printer instead of out the front (as shown in the photos). This is easily achieved using the stock mounting brackets that hold the 3030 extrusion for the V-Minion spool holder.  

I also recommend combining it with a reverse Bowden tube holder such as: Double Remixed V-Minion Bowden Holder by MelvenX.

Happy printing! 

 

 

Tagi