Pistachio Bowl for "Glück" Jar / Pistazienschale für Glücksglas
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
6,37 € – 7,79 € netto (bez VAT)
Dla pliku: Glucksglasaufsatz-Pistazienschale_0.2mm_PLA_MK3S_7h13m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 7,08 € netto (środek widełek).
- Masa podana przez autora
- 86 g
- Czas druku podany przez autora
- 7,21 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A small bowl to mount on top of a jar, fits as lid on the German "Glück" jam jars
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 215
- Wydruki
- 6
- Wyświetlenia
- 2031
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small bowl to mount on top of a jar (79mm mount) which fits as lid on the German "Glück" jam jars and has a opening for the shells (going to the jar). Ideal for pistachios, but can also be used for peanuts, olives (with stone), etc.
The mount has been optimized to fit the nice jars of the german “Glück” jam as shown at the pictures. The jar is great to collect the shells or stones you can put in the inner opening/funnel of the bowl for disposal.
Prints smooth without supports (tested with eSUN PLA+), for detailed settings please gcode or 3mf file.
If you want to check if it fits other jars with 79mm core diameter of the lid, it might make sense to first print only the bottom part of the model, which is screwed at the jar to see if it fits are scaling is required.
Inspired and original idea by https://www.thingiverse.com/thing:5172117 (designed from the scratch using FreeCAD)