1 / 1
Ipad/laptop stand 25°
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
iPad or 13" laptop stand
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 381
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed the stand on the Ender 3 S1 with the following settings (Ultimaker Cura):
Filament: PLA
Layer height: 0.28
Support: Yes
- Support overhang angle at 80 degrees, to use minimal support
- Used tree structure