1 / 2
Silica Gel Box with Sliding Lid (IKEA Samla 22L friendly) — zdjęcie 1
1 / 2

Silica Gel Box with Sliding Lid (IKEA Samla 22L friendly)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the silica gel box, adjusted for better fit in Samla 22L box, with minor material optimizations

Ocena
5 / 5
Polubienia
135
Pobrania
1120
Wydruki
19
Wyświetlenia
5368
Oceny
15

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

About

Remix of the silica gel box:

  • Adjusted for better fit in IKEA Samla 22L box
    • Samla 22L has a bottom size of 300mm x 216mm (measuring the largest usable rectangular surface)
    • This box's dimensions are 146.4mm x 100mm
    • This means you can put 4 of these inside with less spacing between them than the original one
  • Minor optimizations (for more usable volume & fillament savings with minimal impact on sturdiness)
    • Bottom height reduced by 1mm (from 3mm to 2mm)
    • Lid height reduced by 1mm
    • Height of the box's inside raised from 12mm to 21.40mm (total height of 27.4mm)

Should fit almost 200 grams of white silica gel.

Print settings

Printer:

Prusa MINI+

Supports:

No

Resolution: 

0.2 mm

Infill:

20% (Rectilinear)

Filament: PETG (Prusament Prusa Orange & Fiberlogy Orange)

More details

Go to the original model's page for mode details (eg. threaded vs inserts):
https://www.printables.com/model/81318-silica-gel-box-with-sliding-lid-for-100-g-gel

I've prepared both threaded & insert versions with my modifications, however I myself did NOT print the threaded version, only the insert one, so in case of any problems, please contact me about this and I'll try to fix it.

Tagi