1 / 2
Silica Gel Box with Sliding Lid (IKEA Samla 22L friendly) — image 1
1 / 2

Silica Gel Box with Sliding Lid (IKEA Samla 22L friendly)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of the silica gel box, adjusted for better fit in Samla 22L box, with minor material optimizations

Rating
5 / 5
Likes
135
Downloads
1,120
Makes
19
Views
5,368
Reviews
15

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

About

Remix of the silica gel box:

  • Adjusted for better fit in IKEA Samla 22L box
    • Samla 22L has a bottom size of 300mm x 216mm (measuring the largest usable rectangular surface)
    • This box's dimensions are 146.4mm x 100mm
    • This means you can put 4 of these inside with less spacing between them than the original one
  • Minor optimizations (for more usable volume & fillament savings with minimal impact on sturdiness)
    • Bottom height reduced by 1mm (from 3mm to 2mm)
    • Lid height reduced by 1mm
    • Height of the box's inside raised from 12mm to 21.40mm (total height of 27.4mm)

Should fit almost 200 grams of white silica gel.

Print settings

Printer:

Prusa MINI+

Supports:

No

Resolution: 

0.2 mm

Infill:

20% (Rectilinear)

Filament: PETG (Prusament Prusa Orange & Fiberlogy Orange)

More details

Go to the original model's page for mode details (eg. threaded vs inserts):
https://www.printables.com/model/81318-silica-gel-box-with-sliding-lid-for-100-g-gel

I've prepared both threaded & insert versions with my modifications, however I myself did NOT print the threaded version, only the insert one, so in case of any problems, please contact me about this and I'll try to fix it.

Tags