OpenSCAD pipe/round duct fittings library. Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an OpenSCAD library to generate round ducting / pipe, and assosated fittings. The file will generate Pipe Pipe…
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 713
- Wydruki
- 0
- Wyświetlenia
- 2382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
This is one of my models origionally on thingivese, checked and it still works with the newer OpenSCAD releases. hope it finds a new audience here.
This is an OpenSCAD library to generate round ducting / pipe, and assosated fittings. The file will generate
- Pipe
- Pipe with an incorporated fitting
- 90° elbow
- Equal T
- 4 Way T
- N Way manifold
- Blanking cap
- Single reduction
- N Way T
With either solvent weld type ends or a clamp type end.
This a first iteration work in progress that may well be expanded and defiantly needs the code re factoring. I am doubtful that any of the fittings will print without support material but this is becoming much less of an issue.
One interesting use outside of the obvious that occurred to me was for some one with more l33t SCAD skills than me to use anumation features of SCAD to make a version of the old windows pipes screen saver. Now that would be cool.
**WARNING - No warranty is given regarding the fitness of these parts to convey pressurised media if they are fabricated by any means. The user takes all risk in terms of safety and material choice.**
Instructions
The main parameters are
duct_OD = outside diameter of duct/pipe
duct_wall = wall thickness of pipe/duct
length
Fiddle with the parameters, export, print, machine, use in your designs.
V1.1 - added a switch for simple supports on the stepped bore
Category: Engineering