Reusable Spool Case for 250g Sunlu Filament Spools for Bambu Lab AMS Compatibility
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A reusable, ~60g spool case for 250g Sunlu filament spools to fit in the Bambu Lab AMS.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 1189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
When ordering an 8-pack of multicolor 250g spools from Sunlu, I tried respooling the filament onto an existing recyclable Bambu Spool. However, I found the process to be tedious and time-consuming so I created this design so I wouldn't have to respool the filament. I recommend using a tough and rigid material at 100% infill because of just how thin it is. I used PA-CF.
You need to print this twice for each spool you want to encase and do step 1 on both prints
Assembly Instructions:
- Glue the separate “lid” onto the main print.
2. Insert each half of the case onto the spool from opposite sides. 
3. Use 2 M5 bolts and nuts to lock the halves together after lining up the holes on the glued on lid
