Reusable Spool Case for 250g Sunlu Filament Spools for Bambu Lab AMS Compatibility
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A reusable, ~60g spool case for 250g Sunlu filament spools to fit in the Bambu Lab AMS.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 52
- Makes
- 0
- Views
- 1,189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
When ordering an 8-pack of multicolor 250g spools from Sunlu, I tried respooling the filament onto an existing recyclable Bambu Spool. However, I found the process to be tedious and time-consuming so I created this design so I wouldn't have to respool the filament. I recommend using a tough and rigid material at 100% infill because of just how thin it is. I used PA-CF.
You need to print this twice for each spool you want to encase and do step 1 on both prints
Assembly Instructions:
- Glue the separate “lid” onto the main print.
2. Insert each half of the case onto the spool from opposite sides. 
3. Use 2 M5 bolts and nuts to lock the halves together after lining up the holes on the glued on lid
